To Mash Rye In The Common Mode
Take four gallons cold water to each hogshead, add one gallon malt, stir
it well with your mashing stick, until the malt is thoroughly wet--when
your still boils, put in about sixteen gallons boiling water, then put
in one and an half bushels of chopped rye, stirring it effectually,
until there is no lumps in it, then cover it close until the still
boils, then put in each hogshead, three buckets or twelve gallons
boili
g water, stirring it well at the same time--cover it close--stir
it at intervals until you perceive your rye is scalded enough, which you
will know by putting in your mashing stick, and lifting thereon some of
the scalded rye, you will perceive the heart or seed of the rye, like a
grain of timothy seed sticking to the stick, and no appearance of mush,
when I presume it will be sufficiently scalded--it must then be stirred
until the water is cold enough to cool off, or you may add one bucket or
four gallons of cold water to each hogshead, to stop the scalding.
I have known this process succeed well with an attentive distiller.